Email a friend about Lead free SAC Alloys

Request a Quote

RECON.INC - FACTORY AUTHORIZED RE-SELLER OF CANFIELD TECHNOLOGIES PRODUCTS


LEAD-FREE SAC ALLOYS

SAC305, SAC387, SAC405, SAC0307

DESCRIPTION

SAC Alloys are the leading alloys replacing tin-lead solders for electronic assembly applications. These alloys have proven to perform well in surface mount, wave soldering, and hand soldering applications. SAC Alloys may be used with existing equipment, processes, coatings, and flux chemistries. SAC Alloys are available in bar, cored wire, solid wire, foil, preforms, powder, and no-clean, water soluble and RMA solder pastes. 

SAC ALLOYS

TIN

SILVER

COPPER

SAC305

96.50%

3.00%

0.50%

SAC387

95.50%

3.80%

0.70%

SAC405

95.50%

4.00%

0.50%

SAC0307

99.00%

0.30%

0.70%

FEATURES

  • Excellent resistance
  • Excellent solder joint reliability
  • Low melting point for a PB-Free alloy (217°-218°C)
  • Compatible with most flux type

TYPICAL IMPURITY LEVELS IN PERCENT

Al: <0.001

Au: <0.001

Cd: <0.001

Fe: 0.01

In: <0.005

As: <0.01

Bi: 0.01

Zn: <0.001

Ni: <0.003

Pb: <0.03

FLUX COMPATABILIY 

SAC Alloys are compatible with most major electronic grade fluxes on the market today, and are available in paste and wire form in no-clean, water soluble and rosin chemistries. 

TEMPERATURE REQUIREMENTS

APPLICATION

RECOMMENDED TEMPERATURE

REFLOW SOLDERING

PEAK TEMPERATURE 235°-245°C (455°-473° F)

WAVE SOLDERING

POT TEMPERATURE OF 265°-270°C (520°-530°F)

HAND SOLDERING

TIP TEMPERATURE OF 370°-425°C (700°-800°F)

STORAGE & SHELF-LIFE

When stored properly these alloys have no limited shelf-life. Surface oxidation is cosmetic and will not impede product performance.

SAFETY

Use with adequate ventilation and proper personal protective equipment. Refer to the Safety Data Sheet for any specific emergency information. Do not dispose of any hazardous materials in non-approved containers.

 

PDF Downloads





Recon.inc is a Factory Authorized re-seller of Canfield Metals Products.