Air-Vac Solder Pot Rework Station
The PCBRM15 provides precision operation control for Lead-Free and thermally challenging through-hole assemblies. Major advantages include minimal copper dissolution and board delamination, fast and uniform heating, precision alignment, quick component removal/soldering and trouble-free operation.
A Simple Controlled Operation
Components are accurately located over a wave of solder whose shape matches the lead pattern. Solder flows for seconds against the bottom of the board, transmitting heat to the leads. When joints are molten, the component is removed. Holes are cleaned with low pressure air and the new component is inserted and resoldered.
-
Model: PCBRM15
-
Voltage: 208/220/240
-
EPO
Key Benefits:
-
Lead-Free and thermally challenging assemblies
-
Minimal Copper dissolution in PCB barrels
-
Minimal board delamination
-
Fast and uniform heating
-
Precise operating controls and alignment system
-
Quick component removal and soldering
-
Product reliability, simple design, trouble-free operation
Specifications:
-
Physical Dimensions: 32”W x 32”D x 26”H
-
Solder Capacity: 35 lbs. Weight with Solder: 125 lbs.
-
Compressed Air: 40-80 psi, clean moisture free
-
Electrical: 208/220V, 15 amps @ 220V, 50/60Hz single phase, 2500 watts.
Please click on the link below for the Manufacturer's technical information.
http://www.air-vac-eng.com/pcbrm15.html
Please click the link below to see the PCBRM15 in operation at Recon Inc
https://youtu.be/JamhDUuodTs
|
