MPM Speedline ACCUFLEX Screen Printer
-
Model: Accuflex
-
Vintage: 06/2005
-
2D post inspection
-
Pressure Feedback Control Squeegee Head
-
Underwipe Stencil Cleaner
-
Fiducial Recognition for Stencil to PCA Alignment
-
Auto vision system
-
SPC package
-
Stencil cleaner with solvent
-
Board edge clamping system
-
Fixed front rail
-
Auto rail width adjust
-
AccuPro software rev. 8.4 or higher
-
Standard 29×29 frame size
B O A R D H A N D L I N G
-
Maximum Board Size (X x Y) 23" x 20" (584mm x 508mm)
-
Minimum Board Size (X x Y) 3" x 2" (75mm x 50mm)
-
Board Thickness 0.03" to 0.20" including warpage, (0.8mm to 5.0mm)
-
Maximum Board Weight 10 lbs. (4.5kg)
-
Minimum Board Edge Clearance 0.19" (5mm), 0.12" (3mm) - Optional
-
Maximum Underside Clearance 0.59" (15mm)
-
Transport Speed Adjustable
-
Transport Height From Floor 34" - 38
-
Transport Track Feed Direction Left-to-Right, Right-to-Left, Left-to-Left and Right-to-Right
-
Triple Track Conveyor Lengths 52" (1320mm), 60" (1524mm), 68" (1727mm)
-
Method of Board Hold-Down Positive edge-clamps (front and rear)
-
Method of Board Support Independent, moveable magnetic support pins
P R I N T P A R A M E T E R S
-
Maximum Print Area (X x Y) 22" x 19.6" (559mm x 498mm)
-
Snap-off Speed 0.008" - 0.39"/sec, (0.2mm - 10mm/sec)
-
Print Speed 0.2" - 7.87"/sec, (5mm - 200mm/sec)
-
Print Pressure Up to 44 lbs (20 kg)
-
Print Stroke 20" (508mm)
-
Stencil Frame Size 29" x 29" (737mm x 737mm) standard
-
Smaller Frame Accommodations By use of optional Adapters
V I S I O N
-
Vision Field-of-View (FOV) 0.40" x 0.40" (10mm x 10mm)
-
Fiducial Types Standard shape fiducials. See SMEMA standards.
-
Camera System Single roving camera module with dual beam optics
P E R F O R M A N C E
-
Vision Alignment Repeatability +/- 0.001” (+/- 0.025mm) at 6 sigma (Cp greater than or equal to 2.0*) verified with glass plate capability test**
-
Vision Alignment Accuracy +/- 0.001” (+/- 0.025mm) at 6 sigma (Cp greater than or equal to 2.0*) verified with CeTaQ™ CmController™ capability test**
-
Print Deposit Repeatability and Accuracy +/- 0.002” (+/- .050mm) at 6 sigma (Cp greater than or equal to 2.0*) verified with CeTaQ™ CmController™ capability test**
CYCLE TIME
-
Standard Performance 16.2 seconds***
-
Speed Enhancement Package 12.5 seconds***
-
Speed Enhancement Package , Triple Track Conveyor System - 11.0 seconds***
F A C I L I T I E S
-
Power Requirements 110 - 240V, 50/60Hz (+/-10%)
-
Air Supply Requirements **** 5 CFM at 90 psi, Clean Air Supply
-
Height 62" (1575 mm)
-
Depth 57" (1448 mm)
-
Width - Standard Performance 51.7" (1314 mm)
-
Width - High Performance 52" (1320 mm), 60" (1524 mm), 68" (1727 mm)
|
