Pillarhouse Selective Solder

• Model: Jade S200
• Vintage: 2006
• Two (2) pots included - One Lead Free, One Leaded

Specifications

• Height: 1403mm / 55” – excluding light stack
• Width: 1000mm / 40“
• Depth: 1351mm / 53”
• Board size: 457mm x 508mm / 18”x 20” (larger PCB size available upon request)
• Edge clearance: Above / below 3mm
• Height clearance:

                    Above / below 40mm nominal

                    Above 190mm – special application

• Solder:

                   Most commonly used solder types – including lead-free

                   Solder pot capacity: 8kg

• Applicators:

                   AP style – 2.5mm to 16mm dia.

                   Extended AP style – 2.5mm to 20mm dia.

                   Micro nozzle – 1.5mm to 2.5mm

                   Jet-Tip style – 6mm to 20mm dia.

                   Jet-Wave nozzle – up to 25mm width

                   Special dedicated nozzles available upon request

• Flux: Low maintenance Drop-Jet system. Low solids (below 8%), no clean flux, pressurised and inerted system, optional water soluble system available
• X, Y & Z Axis resolution: 0.1mm
• Repeatability: +/- 0.05mm
• Nitrogen usage: 35 litres gas/min. 5 bar pressure
• Nitrogen purity: 99.995% or better
• Air supply pressure: 5 bar / 72 psi
• Power supplies: Single phase + PE
• Voltage: 208V – 250V
• Frequency: 50/60Hz
• Power: 4kVA
• Power with IR preheat:

                   6.5kVA – Top-side

                   8kVA – Top with bottom-side ring heater

• Transport: Hand load
• Tooling: Integral adjustable board guides, includes finger extensions and board clamps

Product installation requirements:

• Facilities: 208V – 250V 50/60Hz 4kVA
• Dims: 55" x 40" x 53"

Fully operational and complete

Warranty