Flying Probe Electrical Tester suitable for fixture-less bare PCBs. It can also be used in combination with a grid tester for fault verification or to test nets exceeding test points of a grid tester.
Software runs on Windows XP. The tester is fast, easy to use, very reliable and easy to maintain.
APPLICATIONS
The FPT is capable of performing electrical tests on PCBs in many situations such as:
-
Prototypes
-
Samples
-
Small volume production
-
Determination of “golden board”
-
Combination test with a grid tester
-
Fault verification
A PCB is tested against a netlist without the need for fixtures. Hence, test can commence immediately after PCB production.
SIMPLE OPERATION
The FPT system can be quickly learned and is simple to operate. Loading of boards is simple. Operators verify faults on or off line. Log files are generated for faults detected during test.
-
Max Test Area: 544 x 404 mm (21 x 16 inch)
-
Resolution X/Y: 0.01 mm (0.4 mil)
-
Speed: 1200 points/min
-
Test Probes: 2 Front 2 Rear
-
Probe tip force: 20-30g
-
Input Data Format: Gerber / IPC-D-356A / Probot-HLS
-
CCD Camera: Visual Aid
-
Physical Dimensions: 51 x 69 x 26 inch
-
Weight: 880 lb
-
Power: 220V or 110V/600W
This machine is NEW ! It has been used for Demo purpose, but not used in production.
|
